Connecting To A Wi-Fi Network - Canon EOS C200 Instruction Manual

Connecting to a Wi-Fi Network

Connecting to a Wi-Fi Network
The camera is Wi-Fi certified and can connect to a Wi-Fi network using an external access point
(wireless router) or can itself serve as a Wi-Fi access point. The camera can connect to wireless
150
routers (access points) and network devices compliant with the 802.11a/b/g/n protocol and that
are Wi-Fi certified (bear the logo shown on the right).
Note that using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties.
Be aware of the risks involved.
You can connect the camera to the network in Infrastructure mode, using an access point (wireless router etc.),
or in Camera Access Point mode, directly to a network device. The type of connection you can use, depends on
the network function you wish to use (A 149).
For an Infrastructure connection, the camera offers 4 ways to configure an access point and the method you use
will depend on the type and specifications of the access point and network you plan to use.
Camera Access Point: When shooting in a location where there are no access points available, the camera can
serve as a wireless access point*. Wi-Fi enabled devices will be able to connect to the camera directly.
* Limited only to the connection between the camera and supported Wi-Fi enabled devices. The functionality is not the same as
that of commercially available access points.
Infrastructure connection:
WPS (button): If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be
easy and require minimal configuring and no passwords. To check if your wireless router
has a WPS button and for details about how to activate the Wi-Fi protected setup, refer to
the instruction manual of your wireless router.
WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS using
a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless
router's WPS function. For details refer to the instruction manual of your wireless router.
Searching for Access Points: If your access point does not support the WPS function or you cannot activate it,
you can have the camera search for access points in the area.
Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automatically
detected by the camera, you can enter all the necessary settings manually. This requires more advanced
knowledge of Wi-Fi and network settings.
IMPORTANT
• Depending on the country/region of use, some restrictions on outdoor use or camera access point
connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details
see REGIONS OF USE in the supplied Basic Guide.