Displaying the Status Screens
You can use the status screens to check the camera's various settings. You can also output the status screens
to an external monitor.
Operating modes:
1 Set an assignable button to [Status] in advance (A 119).
2 Press the assignable button to open the status screens.
• The status screen most recently displayed will appear unless you turned off the camera or changed the
operating mode. In such case, the [Gamma/Color Space/Color Matrix] status screen appears in
mode and the [Assignable Buttons 1/4] status screen appears in
3 Push the joystick left/right to scroll through the status screens.
4 When you have finished, press the assignable button set to [Status] again to exit the status screens.
• Alternatively, you can press the CANCEL button.
[Gamma/Color Space/Color Matrix] screen
[/ Data] screens
[Camera] screens
[Assignable Buttons] screens
[Audio] screens
[Media] screen
[Terminal Outputs] screen
[Recording] screen
[Metadata] screen
[Battery/Hour Meter] screen
[Network] screens
[GPS Information Display] screen*
* Only when the optional GP-E2 GPS Receiver is attached to the camera's system extension terminal.
[Gamma/Color Space/Color Matrix] Status Screen (
1 Gamma curve, color space and color matrix used
for recordings, video output and displays
[CFast]: Settings used for clips recorded on the
CFast card (A 123, 126)
[SD CARD]: Settings/LUT used for clips recorded
on the SD card (A 110)
[SDI], [HDMI]: Settings/LUT used for video output
from the respective terminals (A 144)
1
2
mode.
A 181
A 182
A 183
A 184
A 185
A 186
A 186
A 187
A 187
A 187
A 188
A 189
mode only)
[VIDEO], [VF]: Settings/LUT used for the camera's
LCD screen and viewfinder
k
1
only.
> [
! Custom Picture/HDR] >
2
[Activate Other Settings] setting (whether detailed
settings in the custom picture file are active or
not)
Displaying the Status Screens
1
(A 144)
181