Records; User-Programmable Fault Reports; Event Records; Oscillography - GE T35 UR Series Instruction Manual

6 ACTUAL VALUES

6.4RECORDS


PATH: ACTUAL VALUES RECORDS
 USER-PROGRAMMABLE
 FAULT REPORT
MESSAGE
MESSAGE
This menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section in
chapter 5 for additional information on this feature.

PATH: ACTUAL VALUES RECORDS
 EVENT RECORDS

MESSAGE
MESSAGE
MESSAGE
The event records menu shows the contextual data associated with up to the last 1024 events, listed in chronological order
from most recent to oldest. If all 1024 event records have been filled, the oldest record will be removed as a new record is
added. Each event record shows the event identifier/sequence number, cause, and date/time stamp associated with the
event trigger. See the
COMMANDS
Only major output operands generate events, not every operand. Elements that assert output per phase, for example, log
operating phase output only without asserting the common three-phase operand event.

PATH: ACTUAL VALUES RECORDS
 OSCILLOGRAPHY

MESSAGE
MESSAGE
MESSAGE
MESSAGE
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The
value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillog-
CYCLES PER RECORD
raphy section of chapter 5 for additional details.
GE Multilin

USER-PROGRAMMABLE FAULT REPORT
NEWEST RECORD
NUMBER: 0
LAST CLEARED DATE:
2002/8/11 14:23:57
LAST REPORT DATE:
2002/10/09 08:25:27


EVENT RECORDS

EVENT: XXXX
RESET OP(PUSHBUTTON)
↓
EVENT: 3
POWER ON
EVENT: 2
POWER OFF
EVENT: 1
EVENTS CLEARED
 menu for clearing event records.
CLEAR RECORDS


OSCILLOGRAPHY

FORCE TRIGGER?
No
NUMBER OF TRIGGERS:
0
AVAILABLE RECORDS:
0
CYCLES PER RECORD:
0.0
LAST CLEARED DATE:
2000/07/14 15:40:16
T35 Transformer Protection System

6.4.1 USER-PROGRAMMABLE FAULT REPORTS

6.4.2 EVENT RECORDS
EVENT 3
DATE: 2000/07/14
EVENT 3
TIME: 14:53:00.03405
Date and Time Stamps
6.4.3 OSCILLOGRAPHY
Range: No, Yes
6.4 RECORDS
6
6-21