Setting Groups - GE T35 UR Series Instruction Manual

5.7 CONTROL ELEMENTS
SETTINGS
TRIP BUS 1 INPUT 1
TRIP BUS 1 INPUT 2
TRIP BUS 1 INPUT 16
SETTINGS
TRIP BUS 1
FUNCTION
TRIP BUS 1 BLOCK
SETTINGS
TRIP BUS 1
LATCHING
TRIP BUS 1 RESET
FLEXLOGIC OPERAND
RESET OP
5

PATH: SETTINGS CONTROL ELEMENTS
 SETTING GROUPS

The setting groups menu controls the activation and deactivation of up to six possible groups of settings in the
settings menu. The faceplate Settings In Use LEDs indicate which active group (with a non-flashing energized
ELEMENTS
LED) is in service.
5-146
= Off
= Off
OR
AND
= Off
= Enabled
AND
= Off
= Enabled
= Off
OR
Figure 5–53: TRIP BUS LOGIC

SETTINGS GROUPS

SETTING GROUPS

FUNCTION: Disabled
SETTING GROUPS BLK:
MESSAGE
Off
GROUP 2 ACTIVATE ON:
MESSAGE
Off
GROUP 3 ACTIVATE ON:
MESSAGE
Off
GROUP 6 ACTIVATE ON:
MESSAGE
Off
GROUP 1 NAME:
MESSAGE
GROUP 2 NAME:
MESSAGE
GROUP 6 NAME:
MESSAGE
SETTING GROUP
MESSAGE
EVENTS: Disabled
T35 Transformer Protection System
SETTINGS
TRIP BUS 1 PICKUP
DELAY
Non-volatile,
TRIP BUS 1 RESET
set-dominant
DELAY
S
T
PKP
Latch
T
RST
R
Range: Disabled, Enabled
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
↓
Range: FlexLogic operand
Range: up to 16 alphanumeric characters
Range: up to 16 alphanumeric characters
↓
Range: up to 16 alphanumeric characters
Range: Disabled, Enabled
5 SETTINGS
FLEXLOGIC OPERAND
TRIP BUS 1 OP
FLEXLOGIC OPERAND
TRIP BUS 1 PKP
842023A1.CDR
5.7.3 SETTING GROUPS
GROUPED
GE Multilin