Disconnect Switches - GE T35 UR Series Instruction Manual

5.4 SYSTEM SETUP

PATH: SETTINGS SYSTEM SETUP
 SWITCH 1

5
The disconnect switch element contains the auxiliary logic for status and serves as the interface for opening and closing of
disconnect switches from SCADA or through the front panel interface. The disconnect switch element can be used to cre-
ate an interlocking functionality. For greater security in determination of the switch pole position, both the 89/a and 89/b
auxiliary contacts are used with reporting of the discrepancy between them. The number of available disconnect switches
depends on the number of the CT/VT modules ordered with the T35.
• SWITCH 1 FUNCTION: This setting enables and disables the operation of the disconnect switch element.
• SWITCH 1 NAME: Assign a user-defined name (up to six characters) to the disconnect switch. This name will be used
in flash messages related to disconnect switch 1.
• SWITCH 1 MODE: This setting selects "3-Pole" mode, where disconnect switch poles have a single common auxiliary
switch, or "1-Pole" mode where each disconnect switch pole has its own auxiliary switch.
5-104
 
SWITCHES
SWITCH 1
FUNCTION: Disabled
SWITCH 1 NAME:
MESSAGE
SW 1
SWITCH 1 MODE:
MESSAGE
3-Pole
SWITCH 1 OPEN:
MESSAGE
Off
SWITCH 1 BLK OPEN:
MESSAGE
Off
SWITCH 1 CLOSE:
MESSAGE
Off
SWITCH 1 BLK CLOSE:
MESSAGE
Off
SWTCH 1 ΦA/3P CLSD:
MESSAGE
Off
SWTCH 1 ΦA/3P OPND:
MESSAGE
Off
SWITCH 1 ΦB CLOSED:
MESSAGE
Off
SWITCH 1 ΦB OPENED:
MESSAGE
Off
SWITCH 1 ΦC CLOSED:
MESSAGE
Off
SWITCH 1 ΦC OPENED:
MESSAGE
Off
SWITCH 1 Toperate:
MESSAGE
0.070 s
SWITCH 1 ALARM
MESSAGE
DELAY:
SWITCH 1 EVENTS:
MESSAGE
Disabled
T35 Transformer Protection System
SWITCH 1(24)
Range: Disabled, Enabled
Range: up to 6 alphanumeric characters
Range: 3-Pole, 1-Pole
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: 0.000 to 65.535 s in steps of 0.001
Range: 0.000 to 65.535 s in steps of 0.001
0.000 s
Range: Disabled, Enabled
5 SETTINGS

5.4.6 DISCONNECT SWITCHES

GE Multilin