Dst Set; Network Time Protocol (Ntp) Service; Users - urmet domus 1093/004AHD User Manual/Instructions

2.4.7.2

DST Set

Enter into the interface shown as above and you are allowed to set DST status and mode.
2.4.7.3

Network Time Protocol (NTP) Service

Click [Main menu System General NTP] to enter into the interface shown as below:
NTP Service: Allow you enable/disable the NTP function.
•
Server Address: currently support three servers, including time.windows.com, time.nist.gov and pool.ntp.org.
•
Time Zone: System supports thirty Time Zones.
•
Update now: Click [Update Now] button to change the above NTP set.
•
Note: The above change will be available only when system connected to internet. And When NTP function is set to
"Enable", system will calibrate the time at every 00:07:50 and every start-up.
2.4.7.4

Users

Click [Main Menu System users] option and then enter into the interface shown as below:
The model supports up to seven users with one Admin and seven users.
DS1093-162A 36