Connecting To A Telephone Line; Figure 8-1 Nurit 8400 - Telephone Line Connection - VeriFone NURIT 8000 Installation Manual

NURIT 8400

8. Connecting to a Telephone Line

To connect the NURIT 8400 to a standard analog modular
telephone line:
1. Disconnect the AC/DC Power Adapter from the electrical
power outlet.
2. Remove the cable compartment cover, as described in
"Removing and Replacing the Cable Compartment Cover"
on page 14.
3. Insert the telephone cord supplied with the terminal into
the LINE connector on the rear panel of the terminal.
4. Connect the other end of the telephone cord into a standard
RJ-11 type modular telephone line outlet.

Figure 8-1 NURIT 8400 - Telephone Line Connection

5. Replace the cable compartment cover, as described on
page 15.
6. Reconnect the AC/DC Power Adapter to the electrical
power outlet.
Only use the assigned connection port, labeled LINE for
telephone line connections.
Installation Manual
Caution
19