General Safety Instructions - VeriFone NURIT 8000 Installation Manual

NURIT 8400

2. General Safety Instructions

These safety instructions are based on those provided
by Underwriters Laboratories (UL) Inc. U.S.A.
When using the NURIT 8400 or any associated device, the
following basic safety precautions should always be observed to
reduce the risk of fire, electric shock, or personal injury:
• Read and make sure you understand all instructions.
• Follow all warnings and instructions marked on the device
and in this manual.
•
Before cleaning, turn off the PC, ECR, or other device to
which the NURIT 8400 is connected and disconnect it from
electrical power.
• Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning and/or a soft brush.
• Never spill any liquid on the device.
• Place the device in a stable position on a solid surface.
Serious damage may result if the device falls.
•
Do not cover slots and openings of the device. They may be
provided for ventilation and protection against overheating.
Never place the device near radiators, or in a place where
proper ventilation is not provided.
• Do not place objects on the interconnection cables. Install
the device where no one can step on the cables.
• Never push objects into the device through slots (other than
those specifically intended for the SAM, SIM, SD/MMC,
magnetic stripe, or smart cards.
• To reduce the risk of electric shock, do not disassemble any
of the equipment or accessories referred to in this manual.
If required, take the equipment to a qualified service
representative. Incorrect
removing covers may expose you to dangerous voltages or
other risks.
Installation Manual
Note
reassembly or opening or
3