Connecting An External Telephone; Figure 9-1 External Telephone Connection - VeriFone NURIT 8000 Installation Manual

NURIT 8400

9. Connecting an External Telephone

You can connect a standard external telephone to a model of the
NURIT 8400 that uses the analog telephone network for
communications and does not support a LAN connection.
To connect an external telephone to the NURIT 8400:
1. Disconnect the AC/DC Power Adapter from the electrical
power outlet.
2. Remove the cable compartment cover, as described in
"Removing and Replacing the Cable Compartment Cover"
on page 14.
3. On the rear panel of the NURIT 8400, insert one end of a
telephone cord (model dependent, VeriFone supplied) into
the TEL connector.
4. Insert the other end of the telephone cord into the RJ-11
type modular connector on the base of the telephone.

Figure 9-1 External Telephone Connection

5. Replace the cable compartment cover, as described on
page 15.
6. Reconnect the AC⁄DC Power Adapter to the electrical power
outlet.
If you want to connect an external telephone to the
NURIT 8400 terminal, along with an analog telephone
network connection, you must use a 2-socket RJ-11
plug in the modular wall connector.
Installation Manual
Note
21