Default Bios Setup Entries - Siemens SIMATIC ITP1000 Operating Instructions Manual

6.6.6

Default BIOS Setup entries

Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you have made your
entries.
Main
System parameters
System Time
System Date
Advanced
System parameters
HPET- HPET Support
Advanced > Boot Configuration
System parameters
NumLock
POST Errors
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Defaults
hh:mm:sss
MM/TT/JJJJ
Defaults
Enabled
Defaults
On
All without keyboard
Technical specifications
6.6 BIOS description
Custom entries
Custom entries
Custom entries
89