System Resources; Bios Description; Overview - Siemens SIMATIC ITP1000 Operating Instructions Manual

6.5

System resources

Currently allocated system resources
All system resources (hardware addresses, memory configuration, allocation of interrupts,
DMA channels) are assigned dynamically by the Windows OS, depending on the hardware
configuration, drivers and connected external devices.
You can in each case view information on the current configuration of system resources or
any existing conflicts with the installed operating system as follows:
● Windows icon in the status bar: Start > Enter "msinfo32" in the search box.
6.6

BIOS description

6.6.1

Overview

Parameterize your device in the BIOS Setup.
BIOS Setup program
The BIOS Setup program, or BIOS Setup for short, is located, together with the setup
parameters, in a FLASH block on the motherboard.
Change the setup parameters of the device in the BIOS Setup, e.g. system time or boot
sequence.
Changing the device configuration
Your device configuration is preset for operating with the included software. You should only
change the default setup parameters if technical modifications to your device require
different parameters.
Note
Documentation
BIOS Setup is described for all devices and device configurations. Some BIOS submenus or
Setup parameters may not be included, depending on your order. The interface of your
BIOS Setup can deviate from the figures in this document.
You can find a detailed description of the BIOS on the Support website under
Entry ID: 92189178 (http://support.automation.siemens.com/WW/view/en/92189178).
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Technical specifications
6.5 System resources
83