Operator Controls; On/Off Button; Buttons - Siemens SIMATIC ITP1000 Operating Instructions Manual

1.2.2

Operator controls

1.2.2.1

On/off button

The on-off button is located on the front of the device, see section "Front (Page 13)".
The on/off button (power) has the following functions:
● Switch device on/off (hold the button down for approximately 1 second; the response
depends on the Windows power option settings)
● Switch device off in the event of a fault (hold down for more than 5 seconds)
1.2.2.2

Buttons

The keys are located on the front of the device, see section "Front (Page 13)".
HOME key
● Opens the Windows Start menu
● <Home-Key> + <On-Off-Key>:
Opens the logon mask; corresponds to the shortcut "<Ctrl> + <Alt> + <Del>" for PCs
Locking key
● locks the display from inadvertent operation: Unlock by pressing the Locking key again
● Display is dimmed, no input and no display are possible
Function keys
● freely configurable with the SIMATIC IPC Configuration Center
● SIMATIC IPC Configuration Center is pre-installed in delivery condition.
● For more information, refer to SIMATIC IPC Configuration Center in section "Configuring
the device (Page 45)".
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Overview
1.2 Design of the device
17