Preface - Siemens SIMATIC ITP1000 Operating Instructions Manual

Preface

Purpose of this documentation
These operating instructions contain all the information you need for commissioning and
operating the SIMATIC ITP1000.
It is intended both for testing/debugging personnel who commission the device and connect
it with other units (automation systems, further programming devices), as well as for service
and maintenance personnel who install expansions or carry out fault/error analyses.
Validity of this documentation
This documentation is valid for all supplied versions of the SIMATIC ITP1000 and describes
the delivery status as of May 2017.
Position in the information scheme
These operating instructions are available on supplied USB flash drive "Documentation and
Drivers".
For supplementary instructions on how to handle the software, please refer to the
corresponding manuals.
Conventions
The term "device" is sometimes used to refer to the SIMATIC ITP1000 product in this
documentation.
History
Currently released versions of this operating manual:
Issue
01/2017
05/2017
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Comment
First edition
Battery capacity decreases with higher ambient temperatures, see section
•
Notes on battery operation (Page 32).
Can also be ordered with Intel® Core™ Celeron (Skylake H) processor, see
•
section Features (Page 11).
Can also be ordered with 16 GB RAM, see section Features (Page 11).
•
Can also be ordered with Windows 10 2016 LTSB operating system, see
•
section Features (Page 11).
3