Safety Guidelines For Transport - Siemens SIMATIC ITP1000 Operating Instructions Manual

2.3

Safety guidelines for transport

Before you set off
Observe the following information when you are traveling with the device:
● Save important data from the SSD drive.
● For safety reasons, switch off the radio component (WLAN) if you cannot be sure that the
transmitted radio waves will not interfere with any electrical or electronic equipment in
your vicinity.
● If you want to use your device during a flight, first of all ask the airline company if you are
permitted to do so.
● When traveling abroad, ensure the power adapter can be used with the local mains
voltage. If this is not the case, you must acquire the appropriate adapter for your device.
Do not use any other voltage transformers!
Note
Using the device in different countries
Verify the compatibility of local mains and power cable specifications are compatible
when using the PG abroad. If this is not the case, purchase a power cable that complies
with the local conditions. Do not use connection adapters for electrical appliances in order
to connect the device to them.
Transport
Despite the fact that the device is of a rugged design, its internal components are sensitive
to severe vibrations or shock. With just a few simple transport precautions you can help to
create a trouble-free operation.
● Switch off the device (see section On/off button (Page 17)).
● Disconnect the peripheral devices from the device.
You should always use the original packaging for shipping and transporting the device.
NOTICE
Risk of damage to the device!
If you are transporting the device in extreme weather conditions with large fluctuations in
temperature, care must be taken to ensure that no moisture forms on or in the device
(condensation).
If condensation develops, wait at least 12 hours before switching on the device.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Safety notes
2.3 Safety guidelines for transport
27