Updating The Operating System - Siemens SIMATIC ITP1000 Operating Instructions Manual

5. Select the USB stick in the Boot Manager and confirm your entry.
– To restore a system which boots in "UEFI" mode, you must also boot the supplied
– To boot the Restore USB stick in "UEFI" mode, select the corresponding entry in the
6. Select the function "Restore" and confirm your selection.
7. Follow the instructions on the screen.
Note
In delivery state, Windows 7 boots in "UEFI" mode.
In delivery state, Windows 10 boots in "UEFI" mode.
5.4.4

Updating the operating system

Windows
The latest updates for the Windows operating system are available on the Internet at
Microsoft (http://www.microsoft.com/en-us) and on the device in the Start menu "Start > All
Programs > Windows Update > Check for updates".
Note
Before you install new drivers or operating system updates for Windows MUI versions, set
the menus and dialogs as well as the default language to English (US), see section "Setting
up the language selection using the Multilanguage User Interface (MUI) (Page 65)".
other operating systems
Contact the corresponding manufacturer.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Restore USB stick using UEFI.
Boot Manager.
Device maintenance and repair
5.4 Reinstalling the software
61