Keyboard Inputs For The Bios; Opening The Bios Selection Menu - Siemens SIMATIC ITP1000 Operating Instructions Manual

Technical specifications
6.6 BIOS description
6.6.2

Keyboard inputs for the BIOS

Keyboard inputs are required to call and operate the BIOS. Use an externally connected
USB keyboard or the function key on the front of the device for this purpose. These function
keys are assigned as followed in the BIOS selection menu and in the BIOS Setup menu
when the device starts:
Function
ESC
Enter
Up arrow
Right arrow
Down arrow
Left arrow
See also
Buttons (Page 17)
6.6.3

Opening the BIOS selection menu

Procedure
Note
Key inputs without external keyboard
If you have not connected any external keyboard to your device, you can use the keys on the
front of the device.
You can find information on which keys on the front of the device are to be pressed instead
of the keyboard keys in the section "Keyboard inputs for the BIOS (Page 84)".
1. Reset the device (warm or cold restart).
Depending on the device version, the default settings can differ from the figures shown.
The following message appears briefly on the display at the end of the self-test:
Press ESC for boot options
84
Key on the front of the device
F1
F2
F3
F4
F5
F6
Operating Instructions, 05/2017, A5E37340160-AB
SIMATIC ITP1000