Reinstalling The Software; Installing Drivers And Software - Siemens SIMATIC ITP1000 Operating Instructions Manual

Device maintenance and repair

5.4 Reinstalling the software

5.4 Reinstalling the software
5.4.1

Installing drivers and software

Note
In the case of multilingual operating systems (MUI versions), you must set the menus and
dialogs and the default language to English (US) in the regional settings before new drivers
and operating system updates are installed.
Procedure
1. Connect the supplied USB stick to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the required driver.
6. Open the folder with the driver data by clicking on the link next to "Driver path".
7. Start the setup program in this folder.
Note
For a new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
58
Operating Instructions, 05/2017, A5E37340160-AB
SIMATIC ITP1000