Operating Modes - Siemens SIMATIC ITP1000 Operating Instructions Manual

3.5

Operating modes

In accordance with the settings in the Windows Power Options, the device supports different
operating states. You can manually or automatically, after a particular time interval, put the
device in the following operating states:
● Switch off screen
● Power-saving mode, depending on the configuration, one of the following power-saving
states:
– Sleep (Save to RAM)
– Hibernate (Hibernate, Save to Disk)
● On
● Off
Parameterize the possible operating modes of the device to the following actions in the
power options:
● Operating the on/off button
● Shutting down the operating system (Windows)
● Inactivity of touch or keyboard and mouse
Reactivating the device after standby or hibernation
In standby mode the corresponding system LED flashes; in hibernation, all the LEDs are
switched off. To reactivate the device after these two operating modes, press the on/off
button briefly.
Parameterize the change to the different operating states
In Windows you can set parameters for the time interval and the actions for change to a
different operating mode in the power options. Select:
● "Control Panel\All Control Panel Items\Power Options".
Before changing the power options, make a note of the factory settings, if necessary.
Note
Deactivate hibernation or standby
By changing the power settings, and by adding extra hardware (such as USB-components)
or software to the device, you can modify the operating states so that the device cannot
switch to Hibernation or Standby mode. Even though the screen display is dark, relevant
consumers remain switched on in the device.
Operating modes during transportation of the device
Please remember to always shut down the device or set it to Hibernation prior to transporting
it. You will recognize these operating states, as all status-LEDs of the device are switched off
when power supply is removed. This way you can ensure the device is not switched on and
the battery is not unintentionally discharged during transportation.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Commissioning the device
3.5 Operating modes
39