Point-To-Point Application--Lan To Lan Connection - Planet VC-234G User Manual

4.1 Point-to-Point Application -- LAN to LAN
Connection
Two sets of the VDSL2 Bridge could be used to link two local
Area networks that are located in a different place. Through
the normal telephone line, it could be set up a 190/190Mbps
(VC-234G, G.INP, sym) symmetric backbone, but one VDSL2
Bridge must be Master (CO mode) and the other one is Slave
(CPE mode).
Main office/PBX,
Telco CO,
Wire Closet
Main office/PBX,
Telco CO,
VC-234G/CO
Wire Closet
Asym.
G.INP
CO
OFF
ON 1 2 3 4
ON
8dB
Sym.
Inter
18
LAN to LAN Connection
Ethernet Telephone Network
Telephone wire
Ethernet over VDSL2 and Telephone Network
Telephone wire
Up to 1.4km
VDSL2
VC-234G/CPE
VDSL2
Phone
Phone
Asym.
G.INP
CO
OFF
ON 1 2 3 4
ON
8dB
Sym.
Inter
1000BASE-T UTP
Telephone wire
VDSL2