Table of Contents
Advertisement
DIP-3: Band Profile (Asymmetric/Symmetric)
Asymmetric
Symmetric
DIP-4: SNR (Signal Noise Ratio) Margin
When the SNR margin is selected, the system provides
12dB/8dB SNR margin for across all usable loop lengths. Better
channel noise protection is made with the higher SNR margin.
By default, the four DIP switches, set at the
"ON" position, are operated as "CPE". For oper-
ating as "CO", please turn DIP 1 switch to the
"OFF" position. Then adjust other DIP switches
Note
accordingly to fulfill different network application
demands.
Please
making any transmission mode adjustment.
Note
14
Asymmetric mode provides more bandwidth
than the other side.
This mode provides the highest bandwidth in
short range.
With G.997 band plan supported, symmetric
mode can provide almost the same rate of
downstream and upstream.
power off
the
VDSL2
Bridge
before
Advertisement
Table of Contents
