Rear Panel Connectors - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL
The six character spaces on the right hand side of this line are used to display status symbols as
follows:
a. The monitor status.
b. The key lock status.
The tone encode status. --- symbol is ϕ
c.
d. The scan mode status.
e. The high power transmit status. --- symbol is
f. The [SHIFT] key status.
The fourth line displays (in the left hand four character spaces) the type of tone signalling system
selected by the user. e.g. "5TON" means 5 Tone signalling while DTMF means Dual Tone Multi
Frequency signalling.
The right hand sixteen character spaces are used to display data that the user enters (e.g. 5
Tone calling sequences). These character spaces are also used by the KG510 to display
messages and information directed to the user.
15. Microphone Input Socket 15.
15. 15.
Connect the supplied Kyodo KD561 microphone into this socket.
* Not used on the Single Channel Model
3.2

Rear Panel Connectors

16. 16. 16. 16. 25 way External Options Connector
17. 17. 17. 17.
9 way Programming Connector
18. 18. DC Input Fuse Holder 18. 18.
19. 3 way DC Input Socket 19.
19. 19.
20. 20. TX/Antenna Connector (N type)
20. 20.
21. 21. 21. 21. Ventilation Slots
22. 22. RX Connector (BNC type)
22. 22.
133838
--- symbol is
--- symbol is
--- symbol is
---This symbol is displayed whenever the [SHIFT] key is
held depressed.
Page #7 of 26 Pages 24 January, 2001