Program Channel Scan Operation; Exiting Scan Modes; Priority Scanning - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL
4.5.2

Program Channel Scan Operation

Pressing the [SHIFT] and then the [SCAN] key places the KG510 into Program Channel
Scan mode and the Scan mode symbol " " is displayed in the LCD display. Also the LCD will
display "PRG Scan Mode-in" for two seconds as shown below:
4.5.3 Exiting All Channel Scan and Program Channel Scan modes
Pressing the [SCAN] key will take the KG510 out of either scanning mode and return the
KG510 to normal mode. The scan symbol " " will be removed from the LCD display and the
LCD will display "Scan Mode-out" for two seconds as shown below:
4.5.4

Priority Scanning

The KG510 allows users to firstly enter the required scanning mode, and then they can
enable Priority Scanning for the particular scanning mode chosen.
Pressing the [SHIFT] key and then the [9] key places the KG510 into Priority Scanning mode
as shown below:
Pressing the [SHIFT] and the [9] keys again will take the KG510 out of Priority Scan mode
and return to the Normal Scan mode as shown below:
133838
RX ======
TX
CH01 Kyodo-co
•
Prg Scan Mode-in
RX ======
TX
CH01 Kyodo-co
Scan Mode-out
RX ======
TX
CH01 Kyodo-co
•
Priority Scan
RX =====
TX
CH01 Kyodo-co
•
Normal Scan
Page #16 of 26 Pages 24 January, 2001