Frequency Band Test Mode; Starting Message - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL

4.19 Frequency Band Test Mode

It is possible to display the KG510's operating Frequency Band in the LCD display when in Frequency
Band Test Mode.
Holding the [B] key pressed while switching the POWER SWITCH "ON" places the KG510 in
Frequency Band Test Mode and displays the operating Frequency Band in the LCD Display as shown
below:
"40D" indicates the frequency band for a particular KG510 radio.
Switch the KG510 "OFF" to exit the Frequency Band Test Mode.

4.20 Starting Message

When the KG510 is Switched "ON", it will display a Starting Message in the LCD display for two
seconds. The default Starting Message (using all dots) is shown below:
A personalised message for your business may be shown as the Starting Message. If you require a
personalised message, then it should be entered in the <Miscellaneous Menu> <Starting Message>
field during the programming of the radio. Such a message is shown below:
133838
<PLL Band Check>>
40D OK
•••••••••••
•••••••••••
• <51BS V095 510> •
•••••••••••
Kyodo-co Japan
<51BS V095 510>
Page #24 of 26 Pages 24 January, 2001