Keypad Operation Using The Shift Key - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL
4.3.2 Keypad Operation using the [SHIFT] Key
Some of the KG510's features and how it operates can be changed by using the [SHIFT]
key. To make these changes, it is necessary to firstly press the [SHIFT] key followed by the
other keys within a two second timeframe.
The following key sequences are used for these purposes:
[SHIFT]+[0]
[SHIFT]+[1]
[SHIFT]+[2]
[SHIFT]+[3]
[SHIFT]+[4]
[SHIFT]+[5]
[SHIFT]+[6]
[SHIFT]+[7]
[SHIFT]+[8]
[SHIFT]+[9]
[SHIFT]+[A]
[SHIFT]+[B]
[SHIFT]+[C]
[SHIFT]+[D]
[SHIFT]+[ ]
[SHIFT]+[#]
[SHIFT]+[CH]
[SHIFT]+[SCN] Will place the KG510 in the Program Scan mode or exit from the Program
[SHIFT]+[MON] Invalid Key.
133838
Toggles the tone system between 5-Tone signalling and DTMF signalling.
Switches the LCD back-light ON or OFF.
Toggles the transmitting power between High power and Low power.
Invalid Key.
Toggles between "Single Tone Encoding" mode and "5-Tone" or "DTMF"
signalling mode.
Invalid Key
Enters the KILL mode to allow entry of the KILL password.
Displays the programmed information for the selected (active) channel in
the LCD display.
Locks or Unlocks the KG510's Keypad.
Toggles the KG510 between "Normal Channel Scanning" mode and "Priority
Channel Scanning" mode.
Restores a channel to the Channel Scanning List. (The user must firstly
select the channel to be restored as the active channel).
Invalid Key
Indicates to the KG510 that you have entered the last number of a DTMF
encoding sequence.
Invalid Key
Deletes the active channel from the Channel Scanning List.
Will attach the "R-Number" data to the active encode number and transmit
the whole sequence.
Will start or stop the display of the TX and RX bar graphs in the LCD display.
Scan mode.
Page #10 of 26 Pages 24 January, 2001