Redialling With Dtmf; Restoring The Last Dtmf Numbers To The Lcd Display; Single Tone Encoding - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL
4.4.2.3

Redialling with DTMF

If during the programming of the KG510, the <Attach Decode No> field has been set to
"OFF", the redialling function operates as follows:
Press [SHIFT], then press [#] and the KG510 will redial the last encoded DTMF number.
If during the programming of the KG510, the <Attach Decode No> field has been set to
"ON", the redialling function operates as follows:
Press [#] and the KG510 will redial the last encoded DTMF number with the KG510's
programmed decode number.
Press [SHIFT], and then press [#] and the KG510 will redial the last encoded DTMF number
without the KG510's programmed decode number.
4.4.2.4 Restoring the last DTMF number to the LCD Display
It is possible to restore the last encoded DTMF number to the LCD display, provided the
<Attach Decode No> field has been set to "ON" during the programming of the KG510
transceiver.
Confirm that the LCD is NOT displaying any DTMF numbers, then press [ ] and the last
encoded DTMF number will be displayed in the LCD display.
It is possible to edit this number at this time by pressing the [ ] key (which will erase the last
number) or by pressing the required keys to add additional numbers.
4.4.2.5 Encoding DTMF numbers with the 5-Tone system enabled
It is possible to enter DTMF numbers even with the 5-Tone system enabled. This function
must be enabled during the programming of the KG510 by setting the <DTMF Encode> field
in the <5Tone Encode Menu> to "ENABLE".
To enter a DTMF number (with 5-Tone signalling enabled), the user must press the PTT
lever while entering the first DTMF number. Second and subsequent numbers do NOT
require the PTT lever to be pressed provided all numbers are entered within a few seconds
(before the display reverts to 5-Tone mode and displays "5TON" in the LCD display).
4.4.3

Single Tone Encoding

The KG510 has the ability to encode one of six single tone frequencies for 1, 2, 3, or 4
seconds. This function is enabled during programming of the KG510 by selecting the <Single
Tone ON> field in the <Encode Menu> and setting the encode period.
Press the [SHIFT] and the [4] keys to put the KG510 into Single Tone Encoding mode. "S1"
and the tone frequency ("xxxxHz") will be displayed in the tone area of the LCD display for
about 4 seconds until the KG510 reverts back to the normal signalling mode.
While the KG510 is in Single Tone Encoding mode, it is possible to advance to the next tone
frequency by pressing the [A] key, or to return to the previous tone by pressing the [B] key.
Pressing the [#] key will encode the displayed tone (for the programmed time period) and
automatically exits the Single Tone Encoding mode and returns the KG510 to the normal
signalling mode.
133838 Page #13 of 26 Pages 24 January, 2001