Tx Test Mode; Keypad Test Mode - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL

4.17 TX Test Mode

The KG510 is provided with a TX (Transmit) Test Mode. When the KG510 is placed in the TX Test
Mode, it will transmit a carrier frequency modulated with a 1KHz tone on the selected active channel. It
is possible to change channels while in TX Test Mode.
Pressing the [SHIFT] key and then the [B] key places the KG510 in TX Test Mode and displays the
message in the LCD as shown below:
Pressing the [SHIFT] key and the [B] key a second time will return the KG510 to normal mode and
displays the message in the LCD as shown below:

4.18 Keypad Test Mode

The KG510 is provided with a Keypad Test Mode that allows the user to electrically test all keypad
keys as well as the PTT Key.
Holding the [C] key pressed while switching the POWER SWITCH "ON" places the KG510 in Keypad
Test Mode and displays the message in the LCD Display as shown below:
Then press the keys to be tested one at a time. The respective key will be displayed in the LCD when
the key is operating correctly.
e.g. If you press the [CH] key, the LCD Display will indicate correct operation as shown below:
Switch the KG510 "OFF" to exit this Keypad Test Mode.
133838
RX
TX
CH01 Kyodo-co
TXT TX Test Mode-in
RX
TX
CH01 Kyodo-co
TXT TX Test Mode-out
KEY TEST
Please Key-in
KEY TEST
CH Key
Page #23 of 26 Pages 24 January, 2001