Removing Channels From Scan List; Restoring Channels To The Scan List; Locking The Keypad - KYODO KG510 Operator's Manual

KYODO KG510 OPERATORS MANUAL
4.5.5 Removing an Active Channel from the Scan List
It is possible to temporarily delete an active channel from the scan list by pressing [SHIFT]
and the [ ] key and holding the [SHIFT] and the [ ] keys depressed for more than one
second. More than one channel can be deleted from the Scan list, provided that at least one
channel remains in the Scan List.
A "beep" sound from the radio confirms correct deletion of the channel from the scan list.
This function CANNOT be used in the Priority Scan mode.
The KG510 automatically restores all channels to their respective scanning list as soon as
the KG510 exits from the scan mode.
4.5.6

Restoring Channels to the Scan List

Channels can be restored to the scanning list without exiting from the scan mode by
pressing the [SHIFT] key and pressing and holding the [A] key depressed for more than one
second.
This action will restore all channels to the scan list.
This action CANNOT be used in the Priority Scan mode.

4.6 Locking the Keypad

Pressing the [SHIFT] key and then the [8] key will lock all keys (except the [SHIFT] and [MON] keys)
on the KG510's keypad to prevent accidental or inadvertent entry of data.
After pressing the [SHIFT] and [8] keys the keypad becomes locked and the Key-Lock symbol
displayed in the LCD display. The display also shows "Key-Lock" for two seconds as shown below:
Pressing [SHIFT] and [8] again will Unlock the keypad, remove the Key-Lock symbol from the LCD
display, and display "Key-Unlock" in the LCD display for two seconds as shown below:
133838
RX ======
TX
CH01 Kyodo-co •
Key Lock
RX ======
TX
CH01 Kyodo-co
Key Unlock
Page #17 of 26 Pages
is
24 January, 2001