Before Installation - Panasonic VL-VN1700 Installation Manual

3.1 Before Installation

3.1 Before Installation
3.1.1 Before Installation
Please read the following notes concerning installation and connection before installing the Control Box and
terminal equipment.
Be sure to comply with all applicable laws, regulations, and guidelines.
Notice
Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of
improper installation or operation inconsistent with this documentation.
Installation Precautions
The Control Box is suitable for mounting on a 19-inch rack and should be installed in a location where it is
accessible for inspections and maintenance.
To prevent malfunction, noise, or discolouration, follow the instructions below:
WARNING
Do not install the system in the following locations:
•
Areas where shocks or vibrations are frequent or strong. Such activity may lead to the product
falling over and causing injury, or may impair the product's performance.
•
Areas with high amounts of dust. High amounts of dust can lead to fire or electric shock, and
impair the performance of the product.
CAUTION
Do not install the system in the following locations:
In direct sunlight and hot, cold, or humid places. (Temperature range: 0 ℃ to 40 ℃)
•
•
Areas where sulphuric gases may be present, such as near thermal springs.
•
Near devices that generate high frequencies, such as sewing machines or electric welders.
•
Locations where other objects will obstruct the area around the unit. Be especially careful to leave at
least 5 cm to the sides of the unit for ventilation.
•
Locations where condensation can occur.
Notice
Do not install the system in the following locations:
•
On or near computers, or other office equipment, as well as microwave ovens or air conditioners. (It is
preferable not to install the system in the same room as the above equipment.)
•
Within 1.8 m of radios and televisions. (The Control Box should be at least 1.8 m away from such
devices.)
Do not perform the following:
•
Do not block the openings of the Control Box.
Wiring Precautions
Be sure to follow these instructions when wiring the unit:
CAUTION
•
Avoid using the same AC outlet for computers and other office equipment, as noise generated by
such equipment may hamper system performance or interrupt the system.
26 Installation Manual