De-Registering Ip Telephones - Panasonic VL-VN1700 Installation Manual

4.6.2 De-registering IP Telephones

b.
Click OUS.
c.
Enter a password in the Password cell for each SIP extension.
d.
Click Apply.
e.
Click the cell in the Connection column for each SIP extension to which a password has been
assigned. The Command Connection screen appears.
f.
Click INS.
g.
Click OK.
Note
•
Alternatively, it is possible to set an extension number as a password for each SIP extension
automatically.
•
In order to set the password automatically, do the following in substitution for step c of the
procedure above.
1.
Click Copy to. A screen will appear with information on assigned extension numbers for SIP
extensions.
2.
Click Select All.
3.
Click Execute to copy each Extension Number to Password.
•
When copying extension numbers to passwords, you can also use the
of the Virtual SIP Extension Port Property screen.
3.
Programme the SIP extension you wish to register.
a.
Set the IP address of the Control Box, extension number, and password in the corresponding fields
for your SIP extension.
b.
Send a request from the SIP extension to the Control Box for registration.
•
If the authentication information of the SIP extension and the Control Box match, the registration
is successful.
Note
•
When programming the SIP extension, the names of the corresponding fields may differ
depending on the type of SIP phone you are using.
•
For details about the actual operation of SIP phones, refer to the documentation of the SIP phone.
•
For certain SIP phones, you may need to set a Sign-in name, which should consist of the
extension number and the IP address of the Control Box (e.g., 350@192.168.0.31).
4.6.2 De-registering IP Telephones
De-registration of SIP Phones
The de-registration of SIP phones is carried out by deleting either the extension number or password
registered in the Control Box.
1.
Do the following settings.
a.
Click Setup → Control Box Configuration → Configuration→ Slot.
b.
Click V-SIPEXT.
c.
Click Port Property.
2.
Do the following settings.
48 Installation Manual
icon on the bottom left