Panasonic VL-VN1700 Installation Manual page 16

1.3 Precautions
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse and fuse
cover.
For users in Germany only
•
Machine Noise Information Ordinance, 3rd GPSGV: The highest sound pressure level is 70 dB (A) or less
according to EN ISO 7779.
•
This equipment is not for use at video display work stations according to BildscharbV.
For users in New Zealand only
•
This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service.
•
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom's network services.
•
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds
for which it is designed. Telecom will accept no responsibility should difficulties arise in such
circumstances.
•
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the
equipment (Server) associated with this modem. In order to operate within the limits for compliance with
Telecom's Specifications, the associated Server equipment shall be set to ensure that modem calls are
answered between 3 and 30 seconds of receipt of ringing.
•
Using the toll services of a company other than Telecom:
If the Server is set up to use the toll services of a company other than Telecom, the telephone numbers
dialled from the Caller Display listings within the Server will be directed through the toll services of the
other company because the telephone numbers include the toll access digit and area code digit. A toll
charge may be incurred. Please check with the toll carrier concerned.
•
APPLICABLE ONLY TO TELECOM CUSTOMERS WHO HAVE AUTOMATIC ACCESS TO OTHER
CARRIERS FOR TOLL CALLS
When calling back a number from the Caller ID list, all numbers prefixed with "0 + AREA CODE" will be
automatically forwarded to your toll carrier. This includes numbers in your local calling area. The zero +
area code should either be removed when calling back local numbers, or check with your toll carrier that a
charge will not be levied.
•
All persons using this device for recording telephone conversations shall comply with New Zealand law.
This requires that at least one party to the conversation is to be aware that it is being recorded. In
addition, the principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature
of the personal information collected, the purpose for its collection, how it is used, and what is disclosed
to any other party.
•
The SLT ports are not specifically designed for 3-wire-connected equipment. 3-wire-connected equipment
might not respond to incoming ringing when attached to these ports.
16 Installation Manual