Panasonic VL-VN1700 Installation Manual page 15

Note for the battery symbol
This symbol (②) might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
For users in India only
Declaration of Conformity with the requirements of the E-Waste (Management) Rules
The Product is in conformity with the requirements of the reduction of hazardous substances of the E-Waste
Rules.
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the E-
Waste Rules:
1.
Lead (Pb) – not over 0.1% by weight;
2.
Cadmium (Cd) – not over 0.01% by weight;
3.
Mercury (Hg) – not over 0.1% by weight;
4.
Hexavalent chromium (Cr6+) – not over 0.1% by weight;
5.
Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
6.
Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.
Disposal information
For the purpose of recycling to facilitate effective utilisation of resources, please return
this product to a nearby authorised collection centre, registered dismantler or recycler, or
Panasonic service centre when disposing of this product.
Please see the Panasonic website for further information on collection centres, etc., or
call the toll-free number below.
Website:
http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html
Service helpline: 1800 103 1333 or 1800 108 1333
For users in the United Kingdom
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three-pin mains plug for your safety and convenience. Should the
fuse need to be replaced, please ensure that the replacement fuse is of the same rating and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If
you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement
fuse cover can be purchased from your local Panasonic dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE AC OUTLET IN YOUR PREMISES, THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS
A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT-OFF PLUG IS INSERTED INTO ANY 13
AMP SOCKET.
WARNING
This appliance must be earthed.
or the BSI mark on the body of the fuse.
1.3 Precautions
Installation Manual 15