Table of Contents
Advertisement
Direct Connection
To LAN Port
Notice
When connecting the PC to the MNT port, if the PC is set to obtain the IP address automatically, the IP
address of the PC will be set to an appropriate IP address to establish a connection to the Control Box.
Note
•
Use an Ethernet cable with an RJ45 connector to connect a PC to the Control Box.
•
For pin assignments and maximum cabling distance, refer to "3.3 Connection of Peripherals".
Connection via LAN
LAN
PC
Note
For details about connecting a switching hub to the Control Box, refer to "3.4.1 LAN Connection for the
Main Unit".
Switching Hub
MNT Port
LAN Port
4.2 PC Connection
Installation Manual
41
Advertisement
Table of Contents
Troubleshooting
