Installation; Before Installation - Panasonic VL-V591 Installation And Operation Manual

Lobby station
Hide thumbs Also See for VL-V591:
Table of Contents

Advertisement

Installation

Before installation

Important:
LTo avoid malfunction or communication disturbances, do not install the lobby station in the following locations:
– Places where vibration or any other kind of impact occurs.
– Places near hydrogen sulfide.
L D o not place other devices or obstacles in the area around
the main unit shown in the figure.
L D o not install the power supply unit in the following places:
– Places where the power supply unit may be splashed with water or
chemicals.
– Places where there is a high concentration of dust, or high humidity.
Installation position of the main unit and camera range
Installing on a vertical flat wall
Side view when the camera is facing
forwards at 0° (default).
Example: Installation height is 1330 mm
(standard position).
1810 mm
Center of
main unit
650 mm
66°
Image
range
1330 mm
1160 mm
500 mm
Installing on a tilted pedestal
L D o not install on a pedestal tilted at less than 45°.
Side view when the camera is installed on a pedestal
tilted at 60°, and facing forwards at 0° (default).
Example: Installation height is 1100 mm.
The camera angle can be adjusted using the camera angle control lever on the rear of the upper cabinet (page 8), so
that the image range can be changed.
Note:
L T he measurements and angles are for reference purposes and may vary depending on the environment.
L I f a strong light is shining on the main unit, the visitor's face may not be distinguishable.
Do not place the main unit in the following locations.
– Where most of the background is the sky.
– Where the background is a white wall, and direct sunlight will reflect off it.
– Where direct sunlight will shine on the main unit.
L D o not place the main unit in the locations where echoing occurs, causing the unit to beep frequently.
L Make sure the rear of the main unit is not subject to water.
6
Side view when the camera is
installed lower than the standard
position, and facing upwards at 15°.
Example: Installation height is 980 mm.
1690 mm
710 mm
Center of
66°
main unit
Image
range
980 mm
980 mm
500 mm
Side view when the camera is installed on a pedestal
tilted at 45°, and facing downwards at 5°.
Example: Installation height is 1120 mm.
5 mm
5 mm
15 mm
Main
unit
20 cm
Top view
Image range:
960 mm
500 mm
87°

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents