Resolution Setting - Cygnus M5-C2P Operating Manual

M5-CYG2P-M-01_Iss6.doc
5. When done press the Menu key
to save the new value.
Or press the Power / Cancel to
exit without saving.

Resolution Setting

The gauge can display thickness measurements in three resolution
settings:
• 0.1 mm
• 0.05 mm
• 0.01 mm
For general metal corrosion measurement the 0.1 mm setting is
recommended.
To change the Resolution setting:
1.
Press the Menu key
2.
Press the Up Select key to get to
the Resolution item
0.005 inch
0.002 inch
0.001 inch
Cygnus 2+ Operating Manual
43