Settings Are Saved With The Probe Type - Cygnus M5-C2P Operating Manual

M5-CYG2P-M-01_Iss6.doc
12. Set measurement Units
13.
Set the Vibrate option
14.
Set the Display Rotation option
15. To exit the menu press the Power /
Cancel key once.
16. If you want to change or select the
item currently displayed simply press
the Menu button
17. If the item has a number of choices
you can use the Up and Down keys to
step through each option.
Example.
Units goes from mm to inch.
18.
To save your choice press the menu
key.
To cancel without saving press the
Power / Cancel key.

Settings are Saved with the Probe Type

Certain gauge settings are saved against the probe type. This
allows each probe type to have different settings that will be
recalled when that probe is re-connected and the probe type is
correctly set. The following settings are saved with each probe
type;
Cygnus 2+ Operating Manual
39