Menu 5 - Service - Nibe F1355 Operating Manual

Menu 5 - SERVICE

Overview
5 - SERVICE 5.1 - operating settings **
5.2 - system settings
5.3 - accessory settings
5.4 - soft in/outputs
5.5 - factory setting service
5.6 - forced control
5.7 - start guide
5.8 - quick start
5.9 - floor drying function
5.10 - change log
5.12 - country
* Accessory needed.
Go to the main menu and hold the Back button in for 7
seconds to access the Service menu.
Sub-menus
Menu SERVICE has orange text and is intended for the
advanced user. This menu has several sub-menus. Status
information for the relevant menu can be found on the
display to the right of the menus.
operating settings Operating settings for the heat
pump.
NIBE F1355
5.1.1 - hot water settings *
5.1.2 - max flow line temperature
5.1.3 - max diff flow line temp.
5.1.4 - alarm actions
5.1.5 - fan sp. exhaust air *
5.1.7 - br pmp al set. **
5.1.8 - operating mode brine pump
5.1.9 - brine pump speed
5.1.10 - op. mod heat med pump
5.1.11 - pump speed heating medium
5.1.12 - addition
5.1.14 - flow set. climate system
5.1.22 - heat pump testing
5.1.24 - blockFreq
5.2.3 - docking
5.2.4 - accessories
5.3.1 - FLM *
5.3.2 - shunt controlled add. heat *
5.3.3 - extra climate system *
5.3.4 - solar heating *
5.3.6 - step controlled add. heat
5.3.8 - hot water comfort *
5.3.10 - shunt controlled brine *
5.3.11 - modbus *
5.3.21 - external energy meter*
system settings
tivating accessories etc.
accessory settings
accessories.
soft in/outputs
puts on the terminal blocks (X5) respectively (X6).
factory setting service
ing settings available to the user ) to default values.
forced control
ents in the heat pump.
start guide Manual start of the start guide which is run
the first time the heat pump is started.
System settings for the heat pump, ac-
Operational settings for different
Setting software controlled in and out-
Total reset of all settings (includ-
Forced control of the different compon-
Chapter 3 | Control - Menus 29