Control - Menus; Menu 1 - Indoor Climate - Nibe F1355 Operating Manual

3 Control - Menus

Menu 1 – INDOOR CLIMATE
Overview
1 - INDOOR CLIMATE 1.1 - temperature
1.2 - ventilation
1.3 - scheduling
1.9 - advanced
* Accessories are needed.
Sub-menus
For the menu INDOOR CLIMATE
menus. Status information for the relevant menu can be
found on the display to the right of the menus.
temperature Setting the temperature for the climate
system. The status information shows the set values for
the climate system.
ventilation Setting the fan speed. The status information
shows the selected setting. This menu is only displayed
if the exhaust air module is connected (accessory).
scheduling Scheduling heating, cooling and ventilation.
Status information "set" is displayed if you set a schedule
but it is not active now, "holiday setting" is displayed if
the vacation schedule is active at the same time as the
schedule (the vacation function is prioritised), "active"
displays if any part of the schedule is active, otherwise
it displays " off".
advanced Setting of heat curve, adjusting with external
contact, minimum value for supply temperature, room
sensor and cooling function.
NIBE F1355
1.1.1 - temperature heating
1.1.2 - temperature cooling *
1.1.3 - rel. humidity *
1.3.1 - scheduling heating
1.3.2 - scheduling cooling *
1.3.2 - scheduling ventilation *
1.9.1 - curve
1.9.2 - external adjustment
1.9.3 - min. flow line temp.
1.9.4 - room sensor settings
1.9.5 - cooling settings *
1.9.6 - fan return time *
1.9.7 - own curve
1.9.8 - point offset
1.9.9 - night cooling
there are several sub-
1.9.1.1 heating curve
1.9.1.2 - cooling curve *
1.9.3.1 - min. flow line temp. heating
1.9.3.2 - min. flow line temp. cooling *
1.9.7.1 - own heating curve
1.9.7.2 - own cooling curve *
Menu 1.1 - temperature
If the house has several climate systems, this is indicated
on the display by a thermometer for each system.
Choose between heating or cooling and then set the
desired temperature in the next menu "temperature
heating/cooling" in menu 1.1.
Set the temperature (with room sensors installed
and activated):
heating
Setting range: 5 – 30 °C
Default value: 20
cooling (accessory is required)
Setting range: 5 – 30 °C
Default value: 25
The value in the display appears as a temperature in °C
if the climate system is controlled by a room sensor.
Chapter 3 | Control - Menus 11