Press The Enter Softkey (Figure 7-9) - HP 54753A User Manual

Figure 8-16
1 Press the
2 Press the
3 Press the
4 Press the
5 Press the
6 Press the
7 Press the
8 Press the
9 Press the
10 Press the
You should see a response similar to that in Figure 8-17. The response is nearly
flat, as should be expected from a balanced differential line.
blue key followed by the
SETUP Channel 3 key of the electrical plug-in module.
softkey to turn off the channel 3 display.
Display
SETUP Channel 4 key of the electrical plug-in module.
Display softkey to turn off the channel 4 display.
key.
TDR/TDT Setup
TDT response 3 off . . . softkey.
Response softkey and select
softkey.
Enter
Done softkey.
Differential TDR Measurements
Making Differential TDT Measurements
Clr key.
.
common mode
8-23