HP 54753A User Manual page 278

In Case of Difficulty
C A U T I O N
Electrostatic discharge (ESD) on or near input connectors can damage circuits
inside the instrument. Repair of damage due to misuse is not covered under
warranty. Before connecting any cable to the electrical input, momentarily
short the center and outer conductors of the cable together. Personnel should
be properly grounded, and should touch the frame of the instrument before
touching any connector.
What you'll find in this chapter
This chapter provides a list of suggestions for you to follow if the plug-in module
fails to operate. A list of messages that may be display is also included.
For complete service information, refer to the optional HP 54753A, 54754A Service
Guide .
13-2