Tdr Response 2 - HP 54753A User Manual

Horizontal There are two choices for horizontal mode: track source and
manual . The track source mode sets the control of the horizontal scaling
for the normalized trace to that of the source channel. When manual mode
is selected, the Scale and Position menus appear allowing you to
independently change the horizontal scale and position for the normalized
trace.
Key Path
Key Path
Response scaling . . .
Key Path
Vertical There are two choices for vertical mode: track source and manual .
The track source mode sets the control of the vertical scaling for the
normalized trace to that of the source channel. When manual mode is
selected, the Scale and Offset menus appear allowing you to independently
change the vertical scale and offset of the normalized trace.
Key Path
Horizontal There are two choices for horizontal mode: track source and
manual . The track source mode sets the control of the horizontal scaling
for the normalized trace to that of the source channel. When manual mode
is selected, the Scale and Position menus appear allowing you to
independently change the horizontal scale and position for the normalized
trace.
Key Path
HP 54754A TDR/TDT Setup Menu

TDR response 2

TDR/TDT Setup TDR response 1 . . .Response scaling . . . Horizontal
TDR response 2
The TDR response 2 function is used to enable or disable the display of the
differential or common mode TDT response 2. The choices available are off,
differential, or common mode.
TDR/TDT Setup TDR response 2
The Response scaling function is used when vertical and horizontal scaling of
the normalized response is required that is independent from that of the source
channel. This function only appears when TDR response 2 is set to differential
or common mode.
TDR/TDT Setup TDR response 2 Response scaling . . .
TDR/TDT Setup TDR response 2 . . .Response scaling . . . Vertical
TDR/TDT Setup TDR response 2 . . .Response scaling . . . Horizontal
5-24