Tdt 1 Dest; Tdt 2 Dest - HP 54753A User Manual

1 and 2 Stimulus Menus
Key Path
Key Path
This section describes the menus that are available when the stimulus is set to
1 and 2.

TDT 1 dest

Pressing the TDT 1 dest softkey produces a pull-down menu used to select the
channel used as the destination channel for channel 1 TDT measurements. The
choices available for this pull-down menu depend on the other TDR or electrical
plug-in, if any, in the mainframe.
Any electrical channel is potentially a valid TDT destination channel. The TDT
destination may not be assigned to a channel already assigned as a TDT
destination.
If no other valid TDT destination channels are available then "none" is the only
choice. If a TDT destination other than none is selected then the preset TDR/
TDT control will turn on and preset the TDT destination channel.
TDR/TDT Setup TDT 1 dest

TDT 2 dest

Pressing the TDT 2 dest softkey produces a pull-down menu used to select the
channel used as the destination channel for channel 2 TDT measurements. The
choices available for this pull-down menu depend on the other TDR or electrical
plug-in, if any, in the mainframe.
Any electrical channel is potentially a valid TDT destination channel. The TDT
destination may not be assigned to a channel already assigned as a TDT
destination.
If no other valid TDT destination channels are available then "none" is the only
choice. If a TDT destination other than none is selected then the preset TDR/
TDT control will turn on and preset the TDT destination channel.
TDR/TDT Setup TDT 2 dest
5-18