[Image 5-6] Initial Setup Value Of Located Boards - Wiznet IGM7100 User Manual

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G
G If one of the MAC addresses displayed on the "Board List" is
selected, the current setup values of the selected board will
be displayed on "Board Network Configuration", "Board Serial
Configuration", and "Mode Selection" (for reference, IP,
Subnet, Gateway are set as "0.0.0.0", "255.255.255.0",
"0,0,0,0" as default)

[Image 5-6] Initial Setup Value of Located Boards

G To modify the setup values, press "Setting" after designating
the IP address, etc., then the inserted values will be setup at
the board and message box showing "Setting complete" will be
displayed.
oˆ™‹ž™Œ‹Gp•›Œ™•Œ›Gj–••ŒŠ›› G~¡ˆ™‹GO~p•Œ›SGp•ŠUPG
G
Z_G