Wiznet IGM7100 User Manual page 29

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G
G Board Network Configuration
Network information of selected IGM7100 Test Board is
displayed.
inserted and revised here.
G Board Serial Configuration
Serial information of selected IGM7100 Test Board is
displayed. The board's serial information can be inserted
and revised here.
G Mode Selection
A. Server Mode
Set the IGM7100 to operate in the server mode,
listens in the specified Listen Port and waits for
the client connection.
B. Client Mode
Set the IGM7100 to operate in the client mode and
attempts to connect to the specified IP address
and port of the server.
G Find Board
Searche for operating IGM7100 currently connected to the
network, and the results are displayed as MAC address on
the board list.
G Setting
Insert the network information of the IGM7100 test board,
the serial information of the serial device, and mode
selection value to set the selected board.
oˆ™‹ž™Œ‹Gp•›Œ™•Œ›Gj–••ŒŠ›› G~¡ˆ™‹GO~p•Œ›SGp•ŠUPG
The board's network information can be
G
Y`G