G
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G
G Press reset button of each Board A and Board B and wait
for about 2~3 seconds (time required for initialization)
G Text will be displayed on the "Status Window" as shown in
[Image 5-11].
[Image 5-11] "IGM_PCutil.exe" Connection Window
G Transmit data from the serial device to PC. For example,
Scan some bar codes with the scanner which is connected
to Board B.
G Verify whether the data transmitted by the serial device is
accurately displayed ion the status window as shown in
oGpGj G~¡GO~pSGpUPG
G
[[G