Test Environment Setup; System Setup; Wizfi630'S Default Serial Configuration; Pc #3 Setup - Wiznet WizFi630 Serial Command Manual

1. Test Environment Setup

1.1 System Setup

<WizFi630> 802.11 b/g/n WIFI AP Module
<PC#1> Serial Terminal Program running and connected to WizFi630's Serial Port #1
<PC#2> Serial Terminal Program running and connected to WizFi630's Serial Port #2
<PC#3> TCP Server application is running

1.2 WizFi630's default serial configuration.

A. WizFi630 Serial Port #1 enabled
B. Serial configuration : 38400 / 8 data / No Parity / 1 Stopbits / No Flow control
C. TCP Client Mode / Connection Port 5000
D. Aux Connection Disabled
E. WizFi630 Serial Port #2 disabled

1.3 PC #3 Setup.

F. PC#3's WIFI site survey and connect to ssid named "WLAN-AP"
G. Check IP address of PC#3
H. Chck IP address att "CMD window", use ipconfig

1.4 PC #1 and PC#2 Serial Setup.

I. Supplied Serial cable is made with "RJ45 to DIP9"
J. Connect Serial cable to WizFi630's Serial Port #2
K. Connect Serial cable to WizFi630's Serial Port #2
1