Into The Internet With Avm System Drivers - AVM FRITZ!Card USB Installation Instructions Manual

Into the Internet with AVM System Drivers

or fax machines connected to any analog extensions. Specify
the settings on the "ISDN" settings page of the respective
modules.
3.4 Into the Internet with AVM System
Drivers
As an alternative to FRITZ!web, Internet connections can be
established using the AVM system drivers ISDN CAPI Port
Driver and the NDIS WAN CAPI Driver. Both drivers are con-
trolled over Dial-Up Networking, but use different interfaces
to the Windows system. These system drivers allow you to
use CAPI-based ISDN applications alongside communica-
tions programs that do not have built-in CAPI support.
During the FRITZ! installation you can specify whether you
want to add FRITZ!web to the Startup group. If you select this
option, FRITZ!web is used for every connection to the Inter-
net. If you want to use Dial-Up Networking to connect to the
Internet, you must exit FRITZ!web or remove it from the Star-
tup group.
AVM ISDN CAPI Port Driver
The AVM ISDN CAPI Port Driver allows you to use an ISDN-
Controller as if it were a modem.
Programs designed to communicate with modems can use
the AVM ISDN CAPI Port Driver to address the ISDN interface.
This means that all of the various communications options of
Windows can be used with all AVM ISDN-Controllers. For ex-
ample, you can use Dial-Up Networking and the TCP/IP pro-
tocol to dial into your Internet Service Provider.
The ISDN CAPI Port Driver creates a number of virtual mo-
dems in your system, each of which is configured such that it
can be used immediately with most applications. These mo-
dems can be selected in Windows applications such as Dial-
Up Networking and Microsoft Exchange/Outlook and
Microsoft Money. Just select a pre-configured destination to
launch ISDN communication.
The modem settings can be customized using AT commands.
FRITZ!Card – 3 FRITZ!: Internet and ISDN Software 25