Installing The Driver Software In Windows 98 - AVM FRITZ!Card USB Installation Instructions Manual

2.6 Installing the Driver Software in
Windows 98
Once you have connected FRITZ!Card USB v2.1 to the com-
puter, the Plug & Play mechanism of Windows 98 recognizes
the ISDN-Controller automatically. The Found New Hardware
Wizard is started.
Insert the FRITZ!Card CD and follow the instructions on the
screen. Note the following:
1. When asked: "What do you want Windows to do?", se-
lect the option "Search for the best driver for your de-
vice. (Recommended)."
2. When the program asks where the driver is located, ac-
tivate only the option "CD-ROM drive".
Specifying the driver location in Windows 98
3. If you are asked which driver you want to install, choose
the option "The updated driver (Recommended) AVM
FRITZ!Card USB v2.1 (Win 98/Me)".
4. When the Hardware Wizard reports that "Windows has
finished installing the software that your new hardware
device
FRITZ!Card USB v2.1
FRITZ!Card USB v2.1 is connected to a PBX, on some
PBX systems the "D" LED for the D channel is also lit up.
Conclude the installation by clicking "Finish".

Installing the Driver Software in Windows 98

requires", the
should
FRITZ!Card – 2 Installing FRITZ!Card USB v2.1
"USB" LED on
be
your
lit. If
13