Avm Isdn Capi Port Driver Installation - AVM FRITZ!Card USB Installation Instructions Manual

Installation with Configuration: A number of basic set-
tings can be made during installation, for example, in-
formation for operation at a PBX.
2.8 AVM ISDN CAPI Port Driver
Installation
Upon conclusion of the FRITZ! communications software in-
stallation, you can install the AVM ISDN CAPI Port Driver. A
window with four settings pages is displayed:
Modems
Select here the CAPI Port modems you would like to
install, such as "AVM ISDN Internet (PPP over ISDN)" for
a connection to an Internet Service Provider using
Windows' Dial-Up Networking. View information about
the individual modems by clicking a modem and then
pressing "F1".
Ports
On this settings page you can assign specific COM ports
to the virtual modems. Unless your system requires
special port settings, you can simply confirm the de-
fault settings.
MSN
This setting allows you to separate the online charges
from the charges for voice connections. To use this op-
tion, an MSN must be entered on the "MSN" settings
page. Online connections then will be charged to this
number.
AVM Test Connection / Fast Internet over ISDN
Define here whether two new connections should be
configured in Dial-Up Networking during installation of
the AVM CAPI Port Driver: AVM Fast Internet and AVM In-
tranet. Dial-Up Networking must already be installed on
your computer.
These connections are only designed to check that the
program functions properly. They cannot be used to es-
tablish a connection to the Internet.

AVM ISDN CAPI Port Driver Installation

FRITZ!Card – 2 Installing FRITZ!Card USB v2.1 15