Where To Find What After Installation - AVM FRITZ!Card USB Installation Instructions Manual

Errors During Installation: What to Do

2.9 Where to Find What After Installation

16 FRITZ!Card – 2 Installing FRITZ!Card USB v2.1
This completes the software installation for FRITZ!Card. Re-
start your computer.
Errors During Installation: What to Do
If errors occurred during installation and the software com-
ponents of FRITZ!Card were not installed correctly, proceed
as follows:
1. Remove all of the installed FRITZ!Card components by
following the instructions in the sections "Removing
Software in Windows XP" on page 18, "Removing Soft-
ware in Windows Me and 98" on page 19 and "Remov-
ing Software in Windows 2000" on page 19.
2. Restart your computer.
3. Repeat the complete software installation.
If you want to install individual FRITZ!Card software compo-
nents, please read the instructions in the section "Installing
Individual Software Components" on page 17.
After installation with default settings you will find the soft-
ware components of FRITZ!Card at the following locations:
The driver
FRITZ!Card USB v2.1 is loaded automatically when Windows
is started. The Windows "Start" menu now includes a pro-
gram group "AVM" under "Programs" which contains the fol-
lowing entries:
"AVM Internet Home Page" is a link to AVM's web site (re-
quires a web browser and a connection to the Internet).
"FRITZ!Card USB Readme" contains the latest informa-
tion on the ISDN-Controller.
The "FRITZ!Card USB Setup" program can be used to per-
manently activate or deactivate data compression with
CAPI SoftCompression X75/X42.
The "AVM" program group is not created in Windows 2000 and
XP. The current Readme file for FRITZ!Card USB v2.1 can be found
on the FRITZ!Card CD in the WINDOWS.2K or WINDOWS.XP fold-
er, respectively.
software for the ISDN-Controller