Installing Individual Software Components - AVM FRITZ!Card USB Installation Instructions Manual

The FRITZ! modules are contained in the "FRITZ! ISDN and In-
ternet" icon on the Windows desktop as well as in the
"FRITZ!" program group. For information on features and op-
eration of the FRITZ! modules, see the chapter "FRITZ!: Inter-
net and ISDN Software" on page 21 and the FRITZ! manual
available in PDF format on the installation CD.
If you have installed the AVM ISDN CAPI Port Driver, a link to
the Help file for the ISDN CAPI Port Driver is created on your
desktop.
2.10 Installing Individual Software
Components
Certain software components may already be installed on
your computer, such as FRITZ!, for example. In this case you
may want to install only certain individual components from
the product CD. You can do so as follows:
To install the FRITZ!Card USB v2.1 driver software, open
the README.DOC file in the folder named for your
<OPERATING SYSTEM> on the CD, and follow the instruc-
tions it contains.
To install the FRITZ! communications software, run the
program file SETUP.EXE in the folder SOFTWARE\FRITZ!
on the installation CD.
The AVM ISDN CAPI Port Driver is installed using the
SETUP.EXE file located in the SOFTWARE\CAPIPORT\
CAPIPORT.<OPERATING SYSTEM> folder on the CD.
The CD_INFO.HTM file in the root directory of the FRITZ!Card
CD lists the contents of the CD.

Installing Individual Software Components

FRITZ!Card – 2 Installing FRITZ!Card USB v2.1 17